Snake Scraper Chain Conveyor Elevator Chain

Snake Scraper Chain Conveyor Elevator Chain

Drag Chain Conveyor introduction Drag chain conveyor also be called Snake Chain Conveyor .It has three types : LD,MD and FD; MD snake conveyor can convey powder and small powdery, granular material in closed case, consists of head part, upper horizontal section, upper bending section, vertical...

Product Details

Drag Chain Conveyor introduction

Drag chain conveyor also be called Snake Chain Conveyor .It has three types : LD,MD and FD;

MD snake conveyor can convey powder and small powdery, granular material in closed case, consists of head part, upper horizontal section, upper bending section, vertical section, lower bending section, lower horizontal section and tail part, is a kind of 3D conveying mode combined the horizontal and vertical. It is widely used in metallurgy, chemical industry.


Chain conveyor Characteristic

● 3D conveying mode combined the horizontal, vertical (incline) and horizontal

● The feed port and the discharge port can be set arbitrarily

● Material is almost discharged completely(only less hangover)

●In the process of conveying, conveying chain run on the special rail, the scrapping plate fixed on the chain feed the material into outlet

● Enclosed, ecological, less ground occupy


image001.jpg


Assembly

● The installation work must fitters, riggers, electricians, welders and other professional workers.

●  Firstly correct foundation and assembly frame with level, then fix.

●   Install each part according to the assembly drawing. Install components in accordance with A-J one by one .Connect the two adjacent parts chains first .Then connect the two adjacent casings’ flanges and pay attention to the locating pin hole must be aligned .The connection of flange should flat, not permit to misplacement between flange and rail in up-and-down and left-and -right direction.

●  The head pulley, tail pulley and idler pulley should in the center. Each shaft should be parallel and prevent scraping chain sway in running condition.

●  Check the scraping-plate chain and observe whether the chain run smoothly when assembly chain. Before assembly chain, should open the inspection access cover, head part cover, tail part cover, lower cover in bending section, tail pulley readjust to start point of take up travel, identify the chain’s running direction. It is more convenient if adopt from –down-to –up lifting method. When the chain was taken into casing, the tail end of chain should be draw up by some measure to prevent the chain sliding too fast from accident.  Generally the connection of chain is on the top of sprocket at the tail end section. Readjust the chain after finish assembly the chain, keep the chain in proper degree of tightness. After adjustment, the not using travel is 50% of whole travel.


image003.png


How to send us a correct inquiry

(1) transport length and Silo/Hopper’s size

(2) Transport direction : horizontal,incline or vertical

(3) Transport capacity= ?T/H

(4) Bulk density of transported materials = ? kg/m3

(5) Work continuous or not

(6) Voltage at your location .in China, it is 380V,50HZ,3PH

(7) Which seaport is near to you

(8) Quantity ,MOQ is 1 set

(9) Stainless steel or carbon steel

(10) Surface treatment on conveyors :

For stainless steel ,there are three ways :

A.acid clean; B.sand blasting; C.Polished from Ra 0.1um to 3.2um

For carbon steel ,there are one way : only painting .Painting color is as per request .


image005.jpg

 

FAQ

(1)Q: Are you trading company or manufacturer ?

A: We are a manufacturer with our own factory.

(2)Q: What is size of your factory?

A: 10,000M2

(3)Q: How many employees at your factory ?

A: 70 .including 8 engineers

(4)Q: What are certification do you have ?

A: CE,ISO9001-2008

(5)Q:Can I make our own logo on package?

A:Yes.

(6)Q: Is it reliable if products are made in China?

A:We have a team engaged in professional design and manufacturing conveying equipment since 1985,providing conveyors for customers both at home and abroad .

(7)Q: Can I get English Drawing and documents?

A:Yes,you can . Wuxi Changrong can interpret quickly and communicate accurately for international technology documents .

(8) Q:Can I give dimensions to you ,then make conveyors as per my request ?

A:Yes,you can . Wuxi Changrong can design and make conveyors as per needs .And you can put your own logo on conveyors .


Please feel free to send us your detailed requirements, you would be satisfied with our service.


Contact Below:

WUXI CHANGRONG CONVEYING MACHINERY CO., LTD.
Add:Jiang Industrial Zone, Qianzhou Town, Huishan District,
Wuxi Jiangsu Province 
Tel:+86-510-83380342
Fax:+86-510-83381591
Email: changrong@changrong-jx.com
Web:http://www.wxconveyor.com

 

If you're looking for elevator chain conveyor equipments, CHANGRONG CONVEYING MACHINERY must be your best choice. We will offer you good service and fast delivery.

 


Inquiry