1. Introduction
Changrong Professional design and manufacturing Compact Screw Conveyor has a history of nearly 40 years,If you need Compact Screw Conveyor,you can choose our screw conveyors.
2.Outline drawing of compact screw conveyor with hopper
3.Specification and technical data on compact screw conveyor with hopper
Technical data |
|
Transported materials |
Sludge with oil |
Bulk density of transported materials |
1.5t/m3 |
Volume’s hopper |
2m3 |
Capacity |
3m3/hour |
Motor &gearbox |
Provided by buyer |
Construction material on conveyor |
Paddle screw flight is WNM450,other parts are Q235 |
Screw diameter |
300mm |
Center shaft |
Ø168*10mm |
Transporting length |
3000mm |
This hopper’s screw conveyor is made up of bottom solid shafted screw conveyor + upper paddle screw flight.Sludge with oil is strong abrasive as well as easy to be bridged. We choose wear resistant material --WNM450 on screw flight. Then make the screw flight be paddle type . The paddle is for breaking sludge if there any bridging . In this way ,screw conveyor can work smoothly without any blocking.The ambient temperature is around below 15C to 40C. And compact screw conveyor need endure 60C.
Welding requirements : All welding must be continuous,the height of fillet weld foot is not less than the minimum material wall thickness, ensuring that all welds are uniform, continuous and full, without any defects such as blowhole, pinch undercut, etc.
1. Photos on compact screw conveyor
4.Packing
Usually there exist four types packing :
(1) Plastic film
(2) Plywood pallet or steel pallet
(3) Plywood case
(4) Steel frame
2. Shipping
By sea.
By air.
By train
5.Service
We can send engineer to the job site for measuring size and giving instructions on installation.
6.Certificates
CE,ISO9001,ISO14000,ISO18000
7.How to send inquiry for the compact screw conveyor
Send us :
(1) Transported materials’ bulk density = ?kg/m3
(2) Transported material is powder ,particle or bulk materials,dry or wet ? good flow or bad flow
(3) Transporting capacity
(4) Transporting continuous or not
(5) Conveyor is made of stainless steel or carbon steel
(6) Voltage at your location . in China,it is 380V,50HZ,3PH