Screw Coconut Meat Conveyor Machine is generally used to transport powdery, granulous and nubbly bulk material, unsuitable to transport perishable, glutinous and lumpish material. It is widely used to metallurgy, chemical, construction material and food industry.
The LS Inclined screw conveyor with hopper is made up of gearbox with motor, drive and driven sprocket, chain, screw flight, casing, frame, hopper ,etc. This is how it works: The bulk material feed into the casing and screw flight was hold back by the friction resistance acted on the wall of casing during running, the screw flight push the material and make the material do axial movement, simultaneity the clockwise and counterclockwise fight act as mixer. The material can be discharged at the proper outlet at the bottom of casing or transport out at the end of chute. Conveyor with simple construction, be able to feed and discharge in many position, it is easy to operate, have good seal capability and protect environment.
Usage and Maintenance
The Screw Coconut Meat Conveyor Machine is a kind of conveying equipment for conveying powder, granule and small lump material. The bearings work in dust condition, so it is necessary to operate and maintain correctly, the requirement of operation and maintain is stated as following.
1. The inclined screw conveyor with hopper shall be started no-load. In other words, machine shall be empty while begin to work, don’t feed material toward the inlet chute until the machine run.
2. On initial feed period, it is essential to increase gradually to its rated feeding capacity. It is necessary to feed evenly in order to prevent from overload or blockage.
3. To ensure that machine be started at no-load state, it is forbidden to feed material before stop work , don’t stop the machine until the material in the machine is entirely drained off.
4. To prevent inclined screw conveyor with hopper from stuffing and being damaged, the material without large solid lumps is a must.
5. It is essential to keep all connecting bolts tighten during running. Operator shall keep their eyes on running state of the machine. If find the components is loose, operator shall tighten the screw at once.
6. Pay attention to whether the bolts which connect with screw axes loose, break off or shear off. Once happen such kind of phenomenon, please stop the machine quickly and readjust them.
7. The shaft shall be able to lifted from top of screw conveyor during maintenance.It is forbidden to open cover during running in order to prevent accident.
8. If some abnormal phenomenon emerged during running, stop the machine for inspecting instead of being run violently.
9. Check the sealing box on both bottom of machine, change the sealing parts without any delay if there is leakage..
10. In accordance with specification, moving parts of machine shall be lubricated periodically, refer to Lubrication List.