Screw Conveyor Stainless Steel

Screw Conveyor Stainless Steel

SUS 304 O shape Stainless Steel LS250 Screw Conveyor with gearmotor introduction Wuxi Changrong Conveying Machinery Company design and make various food grade screw conveyors since 2002. Such as Screw conveyor stainless steel for animal feed, lemon juice,malt for beer, yeast for bread, milk...
Chat Now

Product Details

SUS 304 O shape Stainless Steel LS250 Screw Conveyor with gearmotor introduction

Wuxi Changrong Conveying Machinery Company design and make various food grade screw conveyors since 2002. Such as Screw conveyor stainless steel for animal feed, lemon juice,malt for beer, yeast for bread, milk powder,coffee powder and other additives .
We also called this screw conveyor as screw feeder.Its shape is O shape,U shape and V shape .

Screw conveyor stainless steel Specification

Name

Small Stainless Steel Tube Screw Conveyor

Size

LS200*1175L (mm)

Work capacity

Maximum 2.5 m3/h

Machine body

outer pipe

Φ219*6

center pipe

Φ89*6

screw flight

T=4mm,as per needs

flight pitch

P=120~180 mm,variable

check port

with handrail

surface treatment

by polished

Drive Device

motor power

1.5kw

gearbox speed

25 rpm

speed sensor

 IFM brand

Accessory

head & tail bearing

UCFC212,2 pieces

gland packing

Silicon,rubber or PTFE

Hardware

screw & bolt

As per relative standard

washer

As per relative standard

图片14.jpg

Usage

Stainless steel tube shape screw conveyor is application in continuous transporting materials for food industry.Each process ,each component are made as per food industry standard .It is unsuitable for deterioration ,sticky or glutinous and lumpish materials. 

Consist of

Stainless Steel Shafted tube screw conveyor is mainly consisted of three parts : 

(1)Drive device: including gearbox,torque coupling,frame,motor.

(2) feeding inlet and discharging outlet .

(3)screw body: including head & tail bearing,screw flight,trough body,cover,support frame,etc.

How does screw conveyor work  

LS 200 screw conveyor is O shape,outer pipe is made of SUS 304  by model byφ325x5mm .Center shaft is made of seamless pipe by φ89x5mm .

As the fixed center shaft with screw flight rotate in the trough, materials which fall into the trough rotate with screw flights.During running,both materials and screw flights are held back by friction resistance acted on the wall of trough .Then screw flight push materials and make materials do axial movement.Finally,materials will be discharged at the proper discharging outlets at the bottom of trough or discharged at the end of trough.

Structure

Tube shape with simple construction

Top flexible flanges 

Discharge outlet is DN200,ANSI B16.5 150LB RF

图片12.png



Inquiry