Stainless steel screw conveyors introduction
Wuxi Changrong Conveying Machinery Company design and make various food grade screw conveyors since 2002. Such as screw conveyor for animal feed, lemon juice,malt for beer, yeast for bread, milk powder,coffee powder and other additives .
We also called this screw conveyor as screw feeder.Its shape is O shape,U shape and V shape .
Stainless steel screw conveyors Specification
Small Stainless Steel Tube Screw Conveyor
Maximum 2.5 m3/h
T=4mm,as per needs
head & tail bearing
Silicon,rubber or PTFE
screw & bolt
As per relative standard
As per relative standard
U shape ,easy for clean and maintain
Fixed speed can ensure the fixed capacity
Each process and each component are made as per food grade
Strict with Standard : GB16798-1997 and GB14881-94
Can spray water to the inside of conveyor
Stainless steel tube shape screw conveyor is application in continuous transporting materials for food industry.Each process ,each component are made as per food industry standard .It is unsuitable for deterioration ,sticky or glutinous and lumpish materials.
Stainless Steel Shafted tube screw conveyor is mainly consisted of three parts :
Drive device: including gearbox,torque coupling,frame,motor.
feeding inlet and discharging outlet .
screw body: including head & tail bearing,screw flight,trough body,cover,support frame,etc.
How does screw conveyor work
LS 200 screw conveyor is O shape,outer pipe is made of SUS 304 by model byφ325x5mm .Center shaft is made of seamless pipe by φ89x5mm .
As the fixed center shaft with screw flight rotate in the trough, materials which fall into the trough rotate with screw flights.During running,both materials and screw flights are held back by friction resistance acted on the wall of trough .Then screw flight push materials and make materials do axial movement.Finally,materials will be discharged at the proper discharging outlets at the bottom of trough or discharged at the end of trough.
Tube shape with simple construction
Top flexible flanges
Discharge outlet is DN200,ANSI B16.5 150LB RF
How to send us an correct inquiry
Send us :
transport length = ? m
Transport direction :
B:incline .If incline type,what is incline degree ?
Transport capacity= ? T/H
Bulk density of transported materials = ? kg/m3
Work continuous or not
Voltage at your location .in China, it is 380V,50HZ,3PH
Which seaport is near to you
Quantity ,MOQ is 1 set
Construction Material :
A: stainless steel 202,304,310S,321,316,316L,etc
B: carbon steel
Surface treatment :
For stainless steel ,there are three ways :
A.acid clean; B.sand blasting; C.Polished from Ra 0.1um to 3.2um
For carbon steel ,there are one way : only painting .Painting color is as per request .
packing size : 2500*600*600 (mm)
Packing : plywood case
Shipping : by sea
Warranty Time : 12 months
Job site service : as per request
(1)Q: Are you trading company or manufacturer ?
A: We are a manufacturer with our own factory.
(2)Q: What is size of your factory ?
(3)Q: How many employees at your factory ?
A: 70 .including 8 engineers
(4)Q: What are certification do you have ?
(5)Q：Can I make our own logo on package?
(6)Q: What is the fabrication time of conveyor ?
A: for 1 unit, it takes about 25-30 days ;
for 2 units,it takes about 30-35 days.
for more units,it takes about 40 days at least.
(7)Q：Can Provide documents on conveyors? And what are those documents ?
A: Yes.Documents refer to manual book,product certification,inspection records,FAT report ,photos,etc
(8)Q: After we placing the order,will you arrange the installation of the conveyor on job site ?
A: All screw conveyors will be tested before delivery .Most of them are delivered as a complete set.So you can connect the conveyor to the power directly. We will send you the manual book about installation.If you need our assistance,we will be pleased to arrange the installation ,but all cost will be charged by you .
(9)Q: How far from Shanghai to your factory ？
A: Our factory is close to Huishan Staition ,and It takes about 1 hour by high speed railway from Shanghai Station or Shanghai Hongqiao Station to Huishan Station .
If by taxi from Shanghai Pudong Airport ,it takes about 3-4 hours .
(10)Q: How many years for exporting experience ?
A: Since 2001,we export conveyors to oversea’ market .
Please feel free to send us your detailed requirements, you would be satisfied with our service.
WUXI CHANGRONG CONVEYING MACHINERY CO., LTD.
Add：Jiang Industrial Zone, Qianzhou Town, Huishan District,
Wuxi Jiangsu Province
If you're looking for stainless steel screw conveyors equipments, CHANGRONG CONVEYING MACHINERY must be your best choice. Welcome to buy the hapman screw conveyor with us. We will offer you good service and fast delivery.