In the process of making the screw conveyer, it mainly consists of three parts: the inlet and outlet, the conveyer body and the driving device. The spiral blade of the screw conveyer has three forms of the solid spiral surface, the blade spiral surface and the belt spiral surface, in which the blade spiral surface is used less, mainly for the transportation of the viscous and compressible materials.
The screw conveyor has the advantages of small size, good sealing performance, stable and reliable operation, multi point loading and unloading, safe operation and easy maintenance, and so on.
The daily maintenance and management of the screw conveyor
In the process of using the screw conveyor, we must pay attention to its daily maintenance and maintenance. In this way, it can cooperate with the sand dryer to the greatest extent, ensure the production and efficiency, and prolong the service life of the equipment.
1., lubricants should be lubricated to drive parts such as bearings, gears and chains at regular intervals.
After the 2. boxes are stopped, the wear of the spiral blades should be checked. When the wear is serious, the repair welding is needed.
3., the volume should not be overloaded, otherwise the material will not be discharged, causing the bending of the helical shaft and the deterioration of the box.
4., when the medium of the conveyor is high, we should pay attention to whether the expansion and contraction of the box body is free and not stuck. If there is any solution,
5., when the noise emitted by the conveyer is running, it should be covered and checked.http://www.wxconveyor.com/