Specification for the design and installation of vibrating conveyor chutes

- Apr 14, 2018 -

Vibratory conveyors are widely used in metallurgy, mining, coal, building materials, chemicals, food, glass, ceramics and other industries, because it can use the vibration of the trough to quickly transfer the material in the trough from the inlet to the outlet. In order to achieve a variety of bulk, granular or powdery, normal temperature or high temperature delivery of materials.

 

Compared to other conveying equipment, the vibration conveyor has the advantages of simple structure, light weight, low noise, reliable operation, no dust pollution, easy installation and maintenance, etc. This will be so popular. From the structural point of view, the vibratory conveyor has two kinds of open type and closed type, and its trough cross section can be made into various types such as circular, rectangular and trapezoidal.

 

In order to meet different transportation requirements, the feeding and discharging of the vibrating conveyor chute can also be made into a little feed, a little discharge, a point feed, a multi-point discharge, a multi-point feed, a point discharge, etc. according to need. Multiple types; multiple conveyors can be connected and transported when the conveying distance is long.

 

Since the feed trough of the vibrating conveyor is supported by a rubber spring or a steel spring, and the self-synchronous operation of the two vibrating motors fixed on the trough, the feed trough generates a linear vibration, so when it works in the resonance resonance area Can achieve stable amplitude and uniform material transportation.

 

Although the configuration of each vibratory conveyor may be different, their installation and use specifications are similar. Before empty-running test run, all parts of bolts should be inspected, in particular whether the anchor bolts of the vibration motor are fastened and run continuously for 4 hours. Afterwards, the connecting bolts of various parts shall be fastened once more and tightened again and again 2-3 times within one week.

 

At the same time, it is also necessary to check whether the conveyor operation is stable and pay attention to the temperature rise of the vibration motor bearing. After 4 hours of continuous operation, the high temperature of the bearing shall not exceed 75°C. When the vibrating conveyor is in operation, the rotation directions of its two vibrating motors should be reversed to ensure that they operate normally.http://www.wxconveyor.com/