TD bucket elevator working principle and structure

- Apr 18, 2018 -

Bucket elevators have a long service life during use, and their equipment is rarely subjected to the phenomenon of extrusion and collision during operation. The bucket elevator can effectively guarantee the material during the design process. Few sprinkles occur during feeding and unloading, reducing mechanical wear.

Bucket elevator conveyor working principle

Bucket elevator will effectively pick up its material from the storage below during operation, and it will be lifted to the top with the conveyor belt or the chain during operation, and it will turn downwards after passing around the top wheel. Bucket elevator Pour material into receiving tank.

Under normal circumstances, the bucket belt conveyor drive belt is generally used rubber belt, mounted on the lower or upper drive roller and the upper and lower redirection roller. Chain-driven bucket elevators are generally equipped with two parallel transmission chains, with a pair of transmission sprocket wheels above or below and a pair of reversing chain wheels below or above. Bucket elevators are generally equipped with organic shells to prevent dust from flying in bucket elevators.

TD bucket elevator working principle

The TD type bucket elevator is mainly composed of an operating part with the upper section of its drive roller, to a certain extent, it will have the lower section of the tensioning roller, the middle casing, and the drive device, which can be reversed It is composed of a moving device and the like, and is suitable for conveying loose-density, powdery, granular, and small-grained non-abrasive and semi-abrasive bulk materials upwards.

TD Bucket Elevator Structure

There are two types of transmissions of transmission TD-type bucket elevators, each equipped with a YZ-type reducer ZQ (or YY) type reducer. YZ-type shaft reducer is directly installed on the shaft shaft head, eliminating the need for a drive platform, coupling, etc., to make the structure compact, light weight, and its inside with a special roller backstop, reliable backstop. The reducer has low noise, stable operation, and floats with the spindle to eliminate installation stress.http://www.wxconveyor.com/