After Sale Service On Tubular Screw Conveyor On Hopper

- Nov 24, 2018 -

1

This silo locates on the top of twin screw conveyors.There is a tubular screw conveyor which cross the silo.They are used to transport quick lime/calcium lime.The working capacity is 2m3/h.Its technical data form is as below:

Technical data form on the tubular screw conveyor

Screw Diameter

187 mm

Geared motor

R97

Screw Pitch

150 mm

Power

4kw * 1 set of motors,motor is frequency type

Screw fight thickness

4mm

Screw center shaft

ø108*6mm

Substance

CaCO3,Ca(OH2)

Protection class

IP55

Subtance bulk density

0.75t/m3

Insulation grade

F

Feed rate

2m3/h

Voltage

380V,50HZ,3PH

Inclination

0 degree,horizotal transporting

Speed on screw shaft

 31rpm

Construction amterials

Carbon steel by painting

Surface treatment

Sand blasting + painting.

On 22nd November,Wuxi Changrong received call from the site that there existed some vibrating on the tubular screw conveyors .Wuxi Changrong checked with the site ,then send technician to site for solve this problem.

图片1

This is the site factory gate.

You will see some materials were outsite.

图片2

After checking and and analysis on the problems which were caused by the discharging outlets were blocking there and the inlet’s support legs are too short . Wuxi Changrong ‘s technician cut the discharging outlet to the suitable distance and increased the height of support leg. In this way ,he solved the vibrating problem sucessfully .

图片3

The bottom twin screw shafted conveyors works well.

图片4