SUS 304 O shape Stainless Steel LS250 Screw Conveyor with gearmotor introduction
Wuxi Changrong Conveying Machinery Company design and make various food grade screw conveyors since 2002. Such as Screw conveyor stainless steel for animal feed, lemon juice,malt for beer, yeast for bread, milk powder,coffee powder and other additives .
We also called this screw conveyor as screw feeder.Its shape is O shape,U shape and V shape .
Screw conveyor stainless steel Specification
| Name | Small Stainless Steel Tube Screw Conveyor | |
Size | LS200*1175L (mm) | |
Work capacity | Maximum 2.5 m3/h | |
Machine body | outer pipe | Φ219*6 |
center pipe | Φ89*6 | |
screw flight | T=4mm,as per needs | |
flight pitch | P=120~180 mm,variable | |
check port | with handrail | |
surface treatment | by polished | |
Drive Device | motor power | 1.5kw |
gearbox speed | 25 rpm | |
speed sensor | IFM brand | |
Accessory | head & tail bearing | UCFC212,2 pieces |
gland packing | Silicon,rubber or PTFE | |
Hardware | screw & bolt | As per relative standard |
washer | As per relative standard | |
Usage
Stainless steel tube shape screw conveyor is application in continuous transporting materials for food industry.Each process ,each component are made as per food industry standard .It is unsuitable for deterioration ,sticky or glutinous and lumpish materials.
Consist of
Stainless Steel Shafted tube screw conveyor is mainly consisted of three parts :
(1)Drive device: including gearbox,torque coupling,frame,motor.
(2) feeding inlet and discharging outlet .
(3)screw body: including head & tail bearing,screw flight,trough body,cover,support frame,etc.
How does screw conveyor work
LS 200 screw conveyor is O shape,outer pipe is made of SUS 304 by model byφ325x5mm .Center shaft is made of seamless pipe by φ89x5mm .
As the fixed center shaft with screw flight rotate in the trough, materials which fall into the trough rotate with screw flights.During running,both materials and screw flights are held back by friction resistance acted on the wall of trough .Then screw flight push materials and make materials do axial movement.Finally,materials will be discharged at the proper discharging outlets at the bottom of trough or discharged at the end of trough.
Structure
Tube shape with simple construction
Top flexible flanges
Discharge outlet is DN200,ANSI B16.5 150LB RF
